Compatible Devices

• M5 Pro

• M3

• MMS-5e

• MMS-3e

• MMS-1e

• MMS-5A

• MMS-2A

Version History

Quick Start

To quickly setup a system, follow these steps:

1. Add the core driver and the interface drivers for all the outputs you’d like to use in the URC Total Control environment.

2. Enter the IP address of the MMS.

3. Ensure that the drivers are bound properly according to the Configuration section below.
   a. The driver name specifies what output the driver is for.

Overview

The Autonomic URC module suite allows for convenient programming of all models of the Mirage Media Server (MMS) in a URC Total Control 2.0/3.0 System environment.

Autonomic Mirage Media Servers offer up to five audio outputs, each with full access to local and internet-based content, bridging them together with revolutionary TuneBridge® functionality. Each output of the server is fully and discretely controllable.

Features

Version of the The MMS module suite integrates fully into the URC Total Control 2.0/3.0 System. It offers functionality for each of the streaming services as well as full access to all local and streaming content. Each output in the module maps directly to the corresponding output on the MMS server, making MMS outputs available for standard output configurations in the URC environment. The MMS driver contains one-way commands which can be mapped to buttons on URC clients , and also two-way user interfaces for URC clients mentioned above. The one-way driver commands are capable of functioning even while the MMS module is not running on the URC client.

Getting Started

The Autonomic URC module suite for all models of the MMS is compatible with URC Total Control 2.0/3.0 System. Please verify that you are running the latest version of URC Accelerator software and the Mirage Media Server firmware is up to date before proceeding. Check and update your firmware version on the MMS by going to the Firmware tab on the server’s web configuration (at http://server-ip/config/System.html, http://server-ip/Config/Software.html or http://server-ip/config/Software.aspx depending on the MMS model), or from the Autonomic Dealer Zone (http://dealerzone.autonomic-controls.com) company account associated with the MMS.

Download

The latest URC Accelerator software is available from the URC Dealer Portal for authorized URC dealers. If you’re not an authorized dealer, please contact URC:https://www.urc-automation.com/support

All Mirage Media Servers control drivers are available for download on any of our product pages at https://www.autonomic.biz under the “Documents” tab or at https://autonomic.biz/support/ (login required).
To download the URC Module Suite, simply click on the link labeled Autonomic URC Module to start the download of the zip file.

Details of Module Communication

The URC system controller handles all communication with the MMS and is responsible for relaying client commands. Each URC client device (remotes, keypads and mobile apps) is capable of independently controlling all the audio outputs on the MMS. The MMS driver contains all the outputs available on the server, which are capable of being mapped in the URC environment to different rooms or inputs of another device.

Upgrading from a Previous Version

Upgrading from Version 1.x

Version 1.x of the MMS module was intended primarily for Accelerator 1 programmed systems. While it’s possible to use this version on systems programmed with Accelerator 2 or 3, the graphics are not optimized for the interface. The recommendation is to replace version 1.x with the latest available version.

Upgrading from Version 2.0 - 2.2.x

Quick Upgrade from Version 2.0 In order to use all the updated features of the new version it’s important to follow the below steps.

1. Import I the new TCM

2. Restart Accelerator

3. Remove all interfaces of the URC module from the project tree

4. Re-add the interfaces

5. Configure inputs and outputs in “AV AV Inputs & Outputs” Outputsand/or “URC URC Audio Setup”Setup/”DMS Setup”DMS Setup

6. Re-Accelerate UI and Macros.

Configuration

Requirements

• TCM file: contains one-way and two-way driver including client interfaces
• URC Accelerator software 2.0/3.0
• Total Control System Hardware
• Mirage Media Server

Configuring the Total Control System in URC Accelerator

Import Module

Open the URC Accelerator software. Go to the File tab > Import TCM Files. This will open a browse dialog box. Navigate to the location where the .tcm file is saved and click on Open to import the file.

Basic Accelerator Setup

On relaunching the URC Accelerator software, set up a new project by going to File tab > New follow the guided form to create a new project.

Click on Save to Project Tree.

Rooms

The Add Rooms tab will open under Program. Add additional rooms depending on your setup.

URC Devices

Go to Add URC Devices. This is for adding the existing URC Total Control devices. Select the room in the Current Room menu on the left. Double-click on a device, or click on Add to Room button on top left to add a device.
For some devices, a dialog box opens up showing advanced settings for the device. Unless advanced setup is needed, leave default options selected andclick on and click Apply.

Other Devices

Go to Add Other Devices.

1. In the left pane under Select Room, select the desired room to add the
   device to.

2. In Select Database, choose My.

3. In Select Module Type, choose IP Database.

4. In Select Category, choose Audio.

5. In Select Brand pane, choose Autonomic.

6. In Select Model pane, choose the player(s) you wish to add one at
   a time. Double-click on this, or highlight and click on Add Selected
   Modules button on top left to add it to the currently selected room.

   Image Modified

7. In Select Model pane, choose the player(s) you wish to add one at a time i.e. MMS-1E PLAYER A. Double-click on this, or click on Add Selected Modules button on top left to add it to the currently selected room. In the following popup make sure the player added is associated with the correct MMS Core module.

   Image Modified

Network Setup

Go to Network Setup. This section configures both URC and non-URC devices (in this case, Mirage Media Server) with the current network address. As a prerequisite, ensure all the devices are on the network with
desired static or DHCP configuration.

1. Click on tab URC Device. This will show all the currently added URC devices in the project in the left pane.

   1. In this pane, click on the device you want to configure the IP address for.

   Then click

   2. Click on the Refresh button. This might take a small amount of time, after which it will show you the discovered URC devices on the current network of currently selected type in the right pane.

   Pick

   2. Select the device in the right pane with the correct IP address.

   Then click on

   2. Click the Assign button. If the devices are not discovered, please ensure the actual device is on the network and is switched on. Alternatively, you can also manually enter the MAC address and IP addresses of your devices in the left pane.
      

      Image Modified

2. Click on tab Non URC Device. This will show all the currently added non-URC devices in the project in the left pane. If you previously added Mirage Media Server to a room, its instance(s) should show up in the left pane. Enter the IP Address for the MMS in the IP Address field. Port field should already be filled with value 5004.

   

Direct service jumps (Optional)

Starting in version Version 2.3 introduced a simplified method to launch directly into to a specific music service was introduced.

1. To enable a menu button for a specific service Select Properties Manger, highlight the MMS Interface in the “Project Tree” Project Tree and Select “Device Property” Device Property in the “Available Property” Available Property section.

   

2. In the Function List drop-down select the module to be enabled and check the box “Create Create device layout when generating menus and layouts “.

Adjusting Startup Parameters (Optional)

Starting in version 2.3 a new method to provide input parameters to the module was introduced.

1. To enable a menu button for a specific service Select Properties Manger, highlight the MMS Interface in the “Project Tree” and Select Module Parameters.

2. In the Parameter panel adjust the property values (y/n) to customize the module experience.

   

3. Depending on launching to a specific service, local music or the generic all services module, there are different options available. Below is a list of available parameters and where they are applicable.

Inputs and Outputs

Go to AV Inputs & Outputs tab. Click on the Inputs tab. Here, available outputs of the MMS can be assigned to inputs of another device (only if those devices have already been added to the project). The available devices can be selected from Select Device with Inputs drop-down. Drag the outputs from right pane to the left pane next to desired input of currently selected device. Assigned Outputs assigned by accident can be deleted by using the Delete Selected button. For information on configuring Autonomic amps together with the MMS, see the integration guide for the Autonomic Amps.

User Interfaces

Go to Edit User Interfaces tab. Generate Menus & Devices is selected. Advanced options can be edited through the Advanced button. With default options selected, click on Accelerate button. You can choose to leave the existing menus unchanged or erase all menus. If unsure, leave the default option selected and click OK. Click on OK button on the Complete Notification dialog box.

The Edit Menus by Room is displayed next.

Optional: Here you can edit the menus for all rooms for either all devices or individual devices. Rooms can be selected in Selected Room section and device views can be selected in Select View section. On editing a menu, click on Apply to save the changes.

Image Modified

Optional: Configure the mapping of available MMS commands to hard buttons. Go to Edit Device Layouts. This screen allows configuration of commands triggered on hard button presses. On Select Device Layout drop-down menu on the left, select the applicable Mirage Media Server.

All Hard Buttons section shows all hard buttons and their currently assigned commands. Use Previous and Next page buttons to flip through all available hard buttons. Menu Pages section shows commands currently unassigned to any button. To change commands assigned to a hard button, simply drag a command to the new button. You can modify existing commands by dragging from one button to another, or assign new commands by dragging unassigned commands from Menu Pages section to an empty button. Click on Apply to save changes.

Macro Editing

Go to Macro Editing tab. Leave the default options selected and click on Accelerate. Click on OK on the Complete Notification dialog box. Optional: For advanced macro editing, refer to URC documentation.

The module provides an array of Device Events and 2-way commands for custom macro programming and automation tasks. For a reference on the available device events and 2-way commands see the appendix.

Device Events

The module provides event triggers for an array of status changes on the MMS. Triggers will execute a URC macro when the programmed condition occurs.

In the Macro Editing tab click Edit Automation Macros, select Device event from Select Type of Automation Macro and click Add Macro.

I the Device Event Dialog enter the following

• A Descriptive name for the event

• Select the device (MMS interface)

• Select the Event rule to base the trigger on

• Type in and select the properties for the event that would cause the event to trigger

• Click OK to program the macro

See the appendix for a reference to the available events

2-way commands

The module provides queries and other 2-way commands for use in macros and special functions. For a reference of the available 2-way commands see the appendix. A 2-way command can be programmed to execute in any URC macro.

Select the 2-way command button in the macro programming window and a configuration dialog appears

• Set a descriptive name for the query in Name

• Select the device (MMS Interface)

• Select the Command to Query

• Set the required parameters for the command

• See the inline Description fields or refer to the appendix for instructions

• If the command is a query check the Save the result checkbox and select a variable in the drop-down. Create a new Variable if desired.

• The response value will be stored in the specified variable and can be evaluated in any macro.

Punch Through

Go to Punch Through tab. This lets you control the functioning of hard buttons even when the Mirage Media Server module is not running. You can set it up to control Play, Pause, Skip Next and other functions for the
MMS even if you’re in the main menu.

For instance, the ability to control playback buttons like Play/Pause in all menus is still possible if the MMS module isn’t running.

1. In Select Room section in left pane, select the appropriate room.

2. In the Select Device section in the left pane, select the screens in which you want to use MMS buttons.

3. In Punch From, select the buttons you want to redirect (in this example, Play/Pause). Use the drop-down menu, and select the appropriate Mirage Media Server output for the respective room.

4. Click Save to save your changes. Repeat the steps for desired rooms.

Download

Go to Download tab. If the accelerator project has not been saved yet, a prompt will be shown to save it now. Click on OK on the next prompt.

A download screen will be shown with a list of all URC devices added to the project. This will push the current project to the primary controller and clients. Select the devices you want to download to and click on Download to Select Devices (Direct).

Technical Support

If you require further assistance with configuring the URC Module for the Mirage Media Server, please contact Technical Support at (914) 598-1647, option 2, or email support@autonomic-controls.com.

You can also visit the Autonomic Knowledge base (https://autonomic.atlassian.net/wiki/spaces/ASKB/overview) for trouble-shooting information.

For technical support with the URC Total Control 2.0/3.0 System, please contact URC support at: https://www.urc-automation.com/support

Appendix 1: Advanced Macro Integration

2-way module commands

Special Considerations

1. Core vs Interface

   1. All 2-way commands are designed to be run against the module Interfaces.

2. UI Label

   1. Some 2-way commands, that affects the UI, requires the label from the Jump to the module being specified as the UI label parameter. Main, Player A and Player B are valid based on the example below.

      

   2. In this example Main is specified

      

   3. After the 2-way command has been executed, future jumps to the module apply the requested settings.

3. Retrieving data from the API

   1. The MMS’s API can be accessed using a telnet client. Since Windows 7 Microsoft have included telnet as an optional install. Once installed open a command prompt and send telnet <ip> 5004.

      

   2. Once launched any available API commands can be sent, ie browsefavorites.
      The alpha-numeric code between the curly braces are the GUIDs for the favorites. These can be used in the Recall Favorite 2-way command instead of the name.

      

List of 2-way commands

Parameters

Parameters

Parameters:

Parameters:

Set Default Service Account

Parameters

Parameters

Parameters

Parameters

Parameters

Device Events

Core vs Interface

1. All Events are designed to be run against the module Interfaces.

Combination with 2-way commands

1. Events can be combined with 2-way commands for more detailed control

   1. Example – Spotify track preview mode:

      1. Example of how to set URC to play the first 10s of each Spotify track.

      2. TrackTime event to trigger when tracktime > 10s

      3. 2-way command to query if the Current Service is Spotify and save to variable.

      4. If variable equals 1 send a skip next 1-way command

List of Events