Welcome to the Quick Start Guide for the Autonomic M5 Pro and M3 Music Servers. These high-performance music servers are designed for seamless integration into residential and commercial audio systems, providing access to popular streaming services like Spotify, Apple Music, Tidal, and more. This guide will walk you through the basic setup process, including physical installation, hardware connections, system configuration, and streaming service integration.
Basic Requirements:
Network access via Ethernet connection
Power Connection
Audio outputs (analog, digital, or network AoIP via eAudioCast)
Control (iOS/Android App, WebUI or Control System)
Ensure you have the following items before beginning the setup:
Music Server
6ft AC Power Cord (NEMA 5-15P to IEC C13)
Rubber Feet (pre-installed)
2x Terminal Block Connectors (pre-installed)
Ground Screw (pre-installed)
Cloth Product Bag
Rack mount ears and screws (optional for rack installation)
If any items are missing, please get in touch with support.
Physical Placement:
Place the unit in a well-ventilated area with ambient temperatures below 104°F (40°C). Avoid direct exposure to sunlight or placing it on top of other heat-generating equipment.
Maintain Humidity below 90% RH.
If rack mounting, use the included rack mount ears and screws. Ensure the unit is secured.
Ventilation:
The M3 and M5 Pro are not ventilated and emit low amounts of heat from the chassis (136 BTU/hr max). The internal heatsinks have been over-spec’d for the most demanding environments. Units can be rack mounted with no additional space between other Autonomic Music Servers or other low-heat-generating equipment.
Step 1: Connect Power
Use a grounded outlet for safety.
The internal power supply can accept AC voltage between 100v-240v and 50hz-60hz for international use.
Max power consumption is 40W
Step 2: Network Connection
Connect an Ethernet cable from your network switch or router to the Ethernet port on the back of the unit.
For eAudioCast use, ensure IGMP Snooping and Multicast Filtering are turned off on the network equipment.
If other Dante or AES67 devices are on the network, PTP may need to be disabled on the Music Server. Please see this article for more details.
Step 3: Audio Output Connections
WARNING! To avoid damage to the equipment, please ensure there is appropriate volume attenuation in the signal chain. This can be accomplished downstream from the Music Server or by configuring suitable limits for the output volume of the Music Server. |
Analog Output: Connect RCA cables to your amplifier or audio system.
Digital Output: Use optical or coaxial connections for digital audio output.
eAudioCast: The M5 Pro or M3 can broadcast its audio over the network. For more information and configuration assistance, please click here.
Step 1: Power On
Press the power button on the front panel. The unit will take approximately 2 minutes to boot up and fully initialize. On the first boot out of the box, the unit may automatically update its firmware, which can take 5-10 minutes.
Step 2: Access the Web Configuration Interface
Open a web browser on a device connected to the same network.
Navigate to setup.tunebridge.com
If you know the IP address of the Music Server, you can navigate directly to its config page by entering {ServerIP}/config in a web browser
Step 3: Network Preferences
Navigate to the “Network” tab.
Choose your preferred settings (DHCP or Static IP).
Click “Save” to apply changes.
Step 4: Firmware Update
Go to the “System” tab and check for updates.
If an update is available, click “Update all Devices” on the top right to install it. The unit will reboot after updating. On the M5 you can monitor update progress on the front panel screen
To set up streaming services, follow these simple steps:
Step 1: Access Streaming Services Settings
Open the web configuration interface (as described earlier).
Navigate to the "Content Tab" tab.
Step 2: Add Your Credentials
Click on each service you want to use.
Follow the onscreen prompts to enter your credentials
Note: If you encounter issues connecting your accounts, please confirm that your account username and password are correct. Some accounts require active subscriptions. Click here for details on each streaming service.
Additional Tips:
The M5 Pro and M3 support AirPlay 2. Simply select the device from your Apple device’s AirPlay menu for direct playback.
If you need assistance, our support team is here to help. Please have your serial number and purchase information ready when you contact us.
Reset Instructions:
Soft Reset: Press and hold the power button for 5 seconds.
Factory Reset:
Shutdown the device
Press the reset button on the back of the unit.
White holding the reset button, power on the device
Continue to hold the reset button for 10 seconds
On the M5 Pro, you will see the reset progress on the front panel screen.
Note that this will erase all settings.
Support Contact Information:
Phone: 1-914-598-1647
Hours: Monday to Friday, 9 AM - 5 PM EST
Warranty Coverage:
The M5 Pro and M3 are covered by a 2-year limited warranty. For full warranty terms, visit our website. Additional warranty coverage can be added at checkout with the addition of a Tunebridge Plus Subscription.