Crestron Home

MMS devices have very tight integration with Crestron Home, included full browse capability of all services and favorite functionality. Our devices will be discovered as Crestron Ethernet and Wifi devices when configuring the system.

For additional functionality, consider installing the Autonomic Favorite Crestron Home Extension: Crestron Home Favorites Extension

For eSeries Amplifier Config, see this article: Crestron Home eSeries Amplifier Configuration

Configuration

Devices can be added by visiting the Pair Devices section of the Crestron Home configuration app.

1. Select Crestron Wired and Wi-Fi

2. Select Ethernet and Wi-Fi

3. Allow the network scan to complete

4. Select the desired equipment room from the right pane

5. Select the desired MMS from the left pane

   Open

   

MMS outputs can be routed to amplification by visiting the Source Routes section of the Crestron Home configuration app.

1. Select the room housing the MMS from the left pane

2. Select the MMS

3. Select an output from the right panes right side

4. Select the amplification input that matches the physical routing of that output’s wiring

   Open

   

5. Repeat until all MMS outputs are bound

6. The MMS is now available in all rooms serviced by that amplifier