/
MMS - Safe Restart Procedure
MMS - Safe Restart Procedure
If you do have to restart an MMS, it is very important that you do not remove power or press and hold the power button. If you need to restart the server, select from one of the three options listed below:
Press and release the power button. After about a minute the system should power off. Once the system is off, press the power button again to turn it on.
On the Server Settings tab click the reboot button.
Open a telnet connection to port 23 at the server's IP address and send the command "REBOOT".
, multiple selections available,
Related content
Safe Reboot Procedure
Safe Reboot Procedure
More like this
eSeries MMS Automatic Reboots
eSeries MMS Automatic Reboots
More like this
MMS Reset button on Crestron
MMS Reset button on Crestron
More like this
MMS - Update firmware via Telnet
MMS - Update firmware via Telnet
Read with this
Support USB Utilities: Firmware Update, DHCP Reset, Factory Reset, Network Info, etc
Support USB Utilities: Firmware Update, DHCP Reset, Factory Reset, Network Info, etc
More like this
MMS - Control Protocol - Browse by letter
MMS - Control Protocol - Browse by letter
Read with this