Audio Connections
Updated: 11/1/2013
Category: Mirage Media Server
Products: Mirage Media Servers MMS-2, MMS-2A, MMS-5, MMS-5A
Using the supplied audio cables, connect 1-4 of the analog audio outputs to source inputs on
your amplifier or receiver. You may also connect the digital audio output and/or the USB audio
cable to a compatible amplifier. The digital output on the MMS·5A supports 24-bit/192kHz
digital audio, and the MMS·2 supports 24-bit/96 kHz audio.
NOTE: The MMS·2 and MMS-5 utilize jack detection technology to sense which audio outputs are connected. You will not be able to control or access any analog audio channel that does not have the appropriate cable plugged in.