1. Introduction
...
Network access via Ethernet connection
Power Connection
Audio outputs (analog, digital, or network AoIP via eAudioCast)
Control (iOS/Android App, WebUI or Control System)
2. Package Contents
Ensure you have the following items before beginning the setup:
...
Connect an Ethernet cable from your network switch or router to the Ethernet port on the back of the unit.
For eAudioCast use, ensure IGMP Snooping and Multicast Filtering are turned off on the network equipment.
If other Dante or AES67 devices are on the network, PTP may need to be disabled on the Music Server. Please see this article for more details.
Step 3: Audio Output Connections
| Note |
|---|
WARNING! To avoid damage to the equipment, please ensure that there is appropriate volume attenuation in the signal chain. This can be accomplished downstream from the Music Server or by configuring suitable limits for the output volume of the Music Server. |
Analog Output: Connect RCA cables to your amplifier or audio system.
Digital Output: Use optical or coaxial connections for digital audio output.
eAudioCast: The M5 Pro or M3 can broadcast its audio over the network. For more information and configuration assistance, please click here.
5. System Configuration
Step 1: Power On
...