MMS - Crestron - On Screen Display Navigation Commands

Owned by Michele Masiello
Jul 02, 2020
1 min read

To use onscreen navigation on an MMS, you will first need to set the instance that is being controlled, using the command SetOSDInstance followed by the instance name (Main, Player_A, Player_B, Player_C, or Player_D)

For Example:

SetOSDInstance Main

SetOSDInstance Player_B

 Next, you will need the command SendRemote <direction> where <direction> is up, down, left, right, or ok.

For example:

SendRemote Up

SendRemote OK

For press and hold on the d-pad commands, you can append the command with the suffix "_press", followed by "release". This will cause the OSD to scroll quickly after 1/2 second.

For Example:

SendRemote down_press

The scroll will be cancelled by sending a release command, or any other navigation command:

SendRemote release -or- SendRemote up_press

If using Crestron, send all commands through the TX$ on the MMS modules' TCP/IP client. Alternatively, send these commands directly to port 5004 on the serve