MMS2 - Adjusting Fan Speed

Please follow these steps for adjusting the fan speed of the MMS2. Also, please note that it is not recommended to go below a fan speed setting of 80.

  1. Power the server off and and connect a keyboard and monitor

  1. Power up the server and start tapping the DELETE key.  A BIOS screen will appear

  1. Use the right arrow to select the ADVANCED menu.

  1. Use the down arrow to highlight HARDWARE HEALTH CONFIG

  1. Press ENTER

  1. Change the CPU Fan mode setting to PWN MANUALLY MODE and press ENTER

  1. Change CPU Fan PWN control to 80.

  1. Press ENTER

  1. Press F10 to save changes and exit

10.  Press ENTER to confirm

The MMS2 will now reboot.  You can disconnect the monitor and keyboard.